Download Print this page

American DJ DJ SCAN User Instructions page 4

Advertisement

DJ Scan™ Operating Instructions cont.
DMX Operation:
This fixture will react with DMX operation. For best results use only 1 (one) motor function for each
scene (or step), when programming scenes into a DMX controller. This will give you faster mirror and
faster gobo/color changes. For Example:
A. With DMX controller move the mirror up then program the step.
B. Move the mirror down then program that step.
C. Change the gobo/color wheel then program that step.
D. Continue this pattern to achieve best results.
1. Operating through a DMX controller gives the user freedom to create his/her own programs
tailored to their own individual needs. This function also allows you to use your fixtures as spots.
2. This operation will allow you to control each individual fixtures traits with a standard DMX 512
controller such as the American DJ Show Designer
3. The DJ Scan™ uses four DMX channels to operate; Channel 1 is Pan, channel 2 is Tilt, channel 3
is Color, and channel 4 Gobos.
4. To run your fixture in DMX mode, plug in the fixture via the XLR connections to any standard DMX
controller. - Follow the set-up specifications that come with the controller.
DJ Scan™ Focusing
1. To focus a DJ Scan,™ it is best to first turn down the music sensitivity knob to its minimum
position.
2. Loosen the thumb screw on the front of the unit that hold the lens in place.
3. Adjust the focus by manually moving the lens up and down.
4. Tighten the thumb screw after you achieve your desired focus.
Lamp Replacement: Caution! Never open the unit when in use. Always disconnect the main power and
DJ Scan™ Lamp Replacement
allow the unit ample time to cool before attempting to replace the lamp. Remember always replace with
the same type lamp and fuse.
1. Be sure to follow the proper procedures when handling halogen bulbs.
2. Lamp replacement has been made simple by incorporating the use of a removable front cover and
thumb screws.
3. Loosen the thumb screws on front cover.
4. Remove the cover.
5. Remove and replace the bulb.
6. Reassemble.
The American DJ "DJ Scan" ™ comes with a 1 year limited warranty. We recommend filling out the war-
ranty registration card that came with your fixture to validate your warranty. For service contact your
American DJ
dealer.
TM
American DJ Supply
. Los Angeles, CA. 90058 USA DJ Scan Page 4
®
or the American DJ
DMX Operator.
®

Advertisement

loading

This manual is also suitable for:

Dj scan dmx-512