Table of Contents
Advertisement
Installation Instructions
Please note
This product should only be installed by a suitably qualifi ed
electrician or heating installer. The installation must comply
with local Building Regulations and Wiring Regulations,
including any competent person requirements that may exist.
Specifi cation
Thermostat features
Temperature Range
Thermostat Heat, Standby, Cool
Selector
Power Supply
Control Method
Dimensions (mm)
Design Standard
Rated Impulse Voltage
Ball Hardness Test
Control Pollution Situation
Temperature Accuracy
Control Output
Product overview
This thermostat is designed for fan coil and chilled beam
applications alongside proportional valve and actuator systems
where a 0-10v proportional control output is required.
10-30°C
Yes
24 Vac ± 15%, 50/60Hz
P+I, 2k Proportional Band
110 wide x 90 high x 40 high
EN60730-2-9
2.5Kv
75°C
Degree 2
±1°C
0 - 10 Vdc
GB
3
Advertisement
Table of Contents
