8-Port 1000Base-X Ge Module - 3Com 7700R - Switch Starter Kit Installation Manual

16 C 1: S 7700 C
HAPTER WITCH
8-port 1000BASE-X GE
Module
OMPONENTS
1 Ethernet port
2 Ethernet port LED
Each 100 Mbps Ethernet port has a green LED, indicating LINK/ACTIVE status.
Table 15 describes the 48-port 10/100BASE-T Auto-sensing FE module LED.
48-Port 10/100BASE-T Auto-sensing FE module LED
Table 15
LED
LINK/ACT
Table 16 describes the specifications of the 48-port 10/100BASE-T Auto-sensing FE
module.
Table 16 Specifications for the 48-Port 10/100BASE-T Auto-sensing FE Module
Specification Description
CPU MPC850
BootROM 512 KB
SDRAM 64 MB
Dimensions (L X W) 366.7 x 340 mm (14.5 x 13.4 in)
Maximum power 55 W
consumption
Connector RJ-45
Number of ports 48
Port transmission 10 Mbps half/full duplex
speed 100 Mbps half/full duplex
MDI/MDIX auto-sensing
Cables and maximum Cables are 2 100-ohm Category-5 twisted pairs up to 100 m (300 ft).
transmission distance
Compliance IEEE802.3
IEEE802.3u
IEEE802.3x
See "Electrical Port Connector" on page 64 for an illustration of the RJ-45
connector and MDI/MDI-X pinout details.
The 8-port 1000BASE-X GE module provides 8 external GBIC module ports. A
GBIC module is used for each data receiving/transmitting channel. The following
modules are available:
3CGBIC91
■
3CGBIC92
■
3CGBIC97
■
Figure 7 illustrates the 8-port 1000BASE-X GE module.
Description
Green — The port is connected
Off — The port is not connected
Green flashing — Data is being transmitted