Quick Reference; Attaching/Detaching The Stand; Setting The Tv On The Wall - Sharp Aquos LC-32D47UA Operation Manual

QUICK REFERENCE
Attaching/Detaching the Stand Setting the TV on the Wall
• Before attaching (or detaching) the stand, unplug the AC
cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base
area to lay the "TV on. This will prevent it from being
damaged.
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an
optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect
installation of the stand may result in the TV falling
over.
rI!mD
• This TV should be mounted on the wall only with the
AN-37AG5 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
• Installing the TV requires special skill that should
only
be
performed by qualified service personnel.
Customers should not attempt to do the work
themselves. SHARP bears no responsibility for
improper mounting or mounting that results in
accident or injury.
,.
::;:
Angular mounting
• The center of the display:
5/16
inch (7.5 mm) above
the "A" position.
• Refer to the operation
manual of AN-37AG5 for
details.
Vertical mounting
01
About setting the TV angle
Hanging on the wall
AN-37AG5 wall mount bracket.
(See the bracket instructions for details.)
Using an optional bracket to mount the TV
• You can ask a qualified service professional about
using an optional AN-37AG5 bracket to mount the
TV to the wall.
• Carefully read the instructions that come with the
bracket before beginning work.
2 CD
Insert the stand into the openings on the bottom
of the TV.
• Be sure to attach the stand to the
"TV
with the wider
side of the base facing forward.
®
Insert and tighten the 4 screws into the 4 holes
on the bottom of the stand.
1
Confirm that there are 4 screws supplied with the
stand unit.
• To detach the stand, perform the steps in reverse order.
mm
• Detach the cable clamp on the rear of the
"TV
when using
the optional mount bracket.
• Due to the terminal configuration on this
"TV,
when you
wall-mount this model, make sure there is enough space
between the wall and the
"TV
for the cables.
• To use this "TV mounted on a wall, first remove the adhesive
tape at the 4 locations on the rear of the
"TV,
and then use
the screws supplied with the wall mount bracket to secure
the bracket to the rear of the
"TV.
7