Quick Reference; Attaching/Detaching The Stand; Setting The Tv On The Wall; Hanging On The Wall - Sharp LC46SB54U - LC - 46" LCD TV Operation Manual

Liquid crystal television
Table of Contents

Advertisement

QUICK REFERENCE
• Before attaching (or detaching) the stand, unplug the AC
cord from the AC iNPUT terminal.
• Before performing work spread cushioning over the base
area to lay the TV on This will prevent it from being
damaged
• Attach
the stand
in the correct
direction.
• Do not remove
the stand
from the _/unless
using
an
optional
wall mount bracket
to mount
it.
Be sure to follow the instructions,
incorrect installation
of the stand may result in tbe 1]/falling
over,
I
Confirm
that there are 8 screws
(4 short screws
and 4 long screws)
and a hex key supplied
with the
stand unit.
tiff
2 Altach
the supporting
post for the stand unit onto
the base using the box for the stand
unit as shown
below.
• The supporting post altaches to the base at an oft centered
location onthe base Be sure to attach the supporling post in
1hedirection indicated below and altach the stand to the TV
with the wider side of 1he base facing tor_sard
II
TI _L°ng
.......
Hexkey
Forwarded,/
:3 1"_Insert the stand into the openings
on the bottom
of the TV.
"2' Insert and tighten
the 4 short screws
into the 4
holes on the rear of the TV.
"r
Softcushion
_,__",
,,
• To detach the stand, perform the steps in reverse order
"-
o
|-"
_|
I_
A °
= This _ sbould
be mounted
on tbe wall only with the
AN-52AG4
(SHARP) wall mount bracket.
The use of
other wall mount
brackets
may result in an unstable
installation
and may cause serious
injuries.
installing the TV requires
special
skill that should
only be performed
by qualified
service
personnel
Customers
should
not attempt
to do the work
themselves.
SHARP bears no responsibility
for
improper
mounting
or mounting
that results
in
accident
or injury.
Using
an optional
bracket
to mount
the TV
• You carl ask a qua<lified service professional
about
using an optional
AN 52AG4 bracket
to mount the TV
to the wall.
• Carefully
read the instructions
that come
with the
bracket
before beginning
work.
f
Hanging
on the wall
AN 52AG4
wall mount bracket.
See the bracket
instructions
for details.)
Vertical mounting
Angular mounting
About setting
the ]_/angle
015710/15120 <
• The center of the display:
6 3A inches (174.25 ram)
under the "A" position.
Refer to the operation
manual of AN 52AG4 for
details.
• Detach the cable clamp on the rear of the TV when using
the optional mount bracket.
• To use this TV mounted on a wall, remove the covers at
the 4 locations on the rear of the TV, and then use the
screws supplied with the wall mount bracket to secure the
bracket to the rear of the %/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents