Note
•
The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
•
Refer to P70 for the flash range.
•
Depending on the brightness and how fast the subject is moving, jitter may not be avoided even
if [
] is selected.
•
Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
•
The setting is fixed to [
–
In [BABY1]/[BABY2] and [PET] in scene mode
–
In [INDOOR PORTRAIT], [NORMAL SPORTS], [OUTDOOR SPORTS] and [INDOOR
SPORTS] in advanced scene mode
•
Programme Shift cannot be activated when the ISO sensitivity is set to [
•
You cannot select [
cannot select [AUTO] in Manual Exposure Mode.
•
To avoid picture noise, we recommend reducing the ISO sensitivity, setting [NOISE
REDUCTION] in [FILM MODE] towards [_] or setting the items except [NOISE REDUCTION]
towards [`] to take pictures. (P95)
•
The camera will not be able to operate with 3/4/2/1 if the [DIRECT FOCUS AREA] (P141) is
set to [ON]. Set using the Quick Menu (P34).
] in the following cases.
] in Shutter-Priority AE Mode and Manual Exposure Mode. Also, you
Advanced (Recording pictures)
].
VQT2S42
93