Panasonic DMC-G2R Operating Instructions Manual page 200

Others
[THUMBNAIL IS DISPLAYED] appears on the screen.
•
Is it a picture that has been recorded with other equipment? In such cases, these pictures may
be displayed with a deteriorated picture quality.
Red part of the recorded image has changed colour to black.
•
When Digital Red-Eye Correction
of subject with red colour surrounded by a skin tone colour, that red part may be corrected to
black by the Digital Red-Eye Correction function.
> It is recommend to take picture with Flash Mode set to [‡], [‰] or [Œ], or
[RED-EYE REMOVAL] on the [REC] Mode menu set to [OFF]. (P133)
The picture does not appear on the television.
•
Is the camera connected to the TV correctly?
> Set the TV input to external input mode.
•
Output from the [HDMI] socket is not possible when it is connected to the PC or the printer.
> Connect it only to the TV.
The display areas on the TV screen and the camera's LCD monitor are different.
•
Depending on the TV model, the pictures may be extended horizontally or vertically or they
may be displayed with their edges cut off.
The motion pictures cannot be played back on a TV.
•
Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (supplied), or with the HDMI mini cable
(optional), and then play back the motion pictures on the camera. (P164, 165)
> Motion pictures recorded in [AVCHD Lite] can be played back on Panasonic televisions
(VIERA) with the AVCHD logo.
The picture is not displayed fully on the TV.
> Check [TV ASPECT] setting. (P38)
VIERA Link does not work.
•
Is it connected properly with the HDMI mini cable (optional)? (P165)
> Confirm that the HDMI mini-cable (optional) is firmly fitted.
> Press [(] on this unit.
•
Is the [VIERA Link] on this unit set to [ON]? (P39)
> Depending on HDMI terminal of the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch input. (For details on how to switch
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn the power to the unit off and then back on again.
> Set [VIERA Link] to [Off] on the TV and then turn it back to [On]. (Refer to the operating
instructions of the TV for details.)
> Check [VIDEO OUT] setting. (P38)
200
VQT2S42
([ ], [ ], [
TV, PC and printer
])
is in operation, if you take a picture