Chapter 1 Try It! Imagebrowser; Starting Imagebrowser - Canon 6864A001AA - PowerShot A20 2MP Digital Camera Manual

Chapter 1
Try It! ImageBrowser
This chapter covers the basic operations of ImageBrowser. It
explains how to start ImageBrowser, import images from a
camera, and then print the images. Let's begin with how to start
ImageBrowser.
IMPORTANT
This manual assumes that all the required applications and
USB drivers have been correctly installed. If some of the
required applications or drivers are not installed yet, be sure
to refer to the corresponding supplied documentation and
perform installation.
Starting ImageBrowser by connecting a camera to your
computer
You can start ImageBrowser by connecting a camera and
enabling it for communication with your computer, using the
following procedure.
IMPORTANT
This method applies only when you connect the camera to
your computer through a USB port. When you connect the
camera through a serial port or use a card reader, see the
Using Non-USB Connections section in the Appendices.
REFERENCE
You can prevent ImageBrowser from starting automatically.
For setting details, see Preventing ImageBrowser from
Starting Automatically in the Appendices.
4 ImageBrowser Software Guide

Starting ImageBrowser (1/2)

1
Connect a camera to your computer using a USB cable.
For information on how to connect a camera to your computer,
refer to the documentation that comes with the camera.
2
Make the camera ready for communication with your
computer.
This operation may differ, depending on the camera. Therefore,
be sure to refer to the documentation that comes with the
camera.
The following window appears. (This window only appears the
first time you turn on your computer.)
If the window above does not appear, see the Troubleshooting
section in the Appendices .
3
Click [Set].
ImageBrowser starts.
The model name
of the camera that
you are using
appears here.