Table of Contents
Advertisement
CONTROLS AND CONNECTORS
CABLE CONNECTIONS
Turn off your computer before performing the procedure below.
1
Plug the power cable of your monitor into a nearby outlet. Plug the other
end of the power cord into the PC port.
2. Connect one end of the 15-pin VGA cable to the back of the monitor and
connect the other end to the computer's D-Sub port.
3.
(O nly dual-input model)Connect one end of the 24-pin DVI cable to the
back
of the monitor and connect the other end to the computer's DVI
port.
4.
Turn on your monitor and computer.
1.
Power Cable
2.
Signal Cable
3.
DVI Cable(Only dual-input model)
Figure 1
Connecting Cables
5
Advertisement
Table of Contents
