Charging The Battery - Acer Digital camera 7.40-megapixel CCD User Manual

Charging the Battery

You need to use the docking station and AC power adapter to charge the battery.
Make sure that the power of the camera is off and then insert the battery before
starting.
1. Position the camera on the docking station.
2. Insert one end of the AC power adapter into
the DC IN 5V terminal of the docking station.
3. Insert the other end of the AC power adapter
into a wall outlet.
The docking station LED lights red while
the battery is charging and turns into
green when the battery is fully charged.
It is recommended to fully discharge or
exhaust the battery before being charged.
Charging time varies according to the
ambient temperature and the status of battery.
This camera must be used with specified battery, docking station and AC power
adapter for battery charging. Damage caused by the use of an incorrect adapter
is not covered under the warranty.
The battery may feel warm after it has been charged or immediately after being
used. This is normal and not a malfunction.
When using the camera in cold areas, keep the camera and battery warm by
holding them inside your outer cloth.
We recommend the battery should be charged 8 hours as first time use.
EN-11