The Select Tool - Brother Pacesetter Embroidery Lettering Instruction Manual

72 Pacesetter Embroidery Lettering Software
Instruction Manual
The Select tool is also used to select a number of components
in order to align them as you wish; for more information, see,
"Aligning design components horizontally and vertically".
The Select tool can be used for both text segments and design
segments; however, to do more detailed editing of text
segments, such as resizing, stretching, or rotating, you will want
to select them with the appropriate text tool.
For more information on editing with these tools, see the
corresponding sections for each tool under "Creating Lettering".
To select one segment in the design:
1 From the Home tab, click the Select
2 Click the design component you want to select.
The active segment is enclosed in a selection box.
To select multiple components in the design:
1 From the Home tab, click the Select
2 Click a design component. Press CTRL on your keyboard
while you click each design component not already
selected.
The active design components will be enclosed in a selection
box with handles.
To select all components of the design:
• Do either of the following:
• Press Ctrl + A on the keyboard.
Using the Select
box large enough to enclose all components of the design.
tool.
tool.
tool, click in the workspace, and draw a