o Adjust the oval hyperspeed or double hyperspeed zone between
power levels 1 and 9, using the plus (4) and minus (5) buttons.
o The central section is switched on.
o If you wish to also activate the outer section of the oval
hyperspeed zone, you should press the oval hyperspeed zone
dual circuit ON/OFF button (8). The oval hyperspeed zone dual
circuit indicator neon (9) will light.
o If you have switched on the central section of the double
hyperspeed zone, to activate the outer section. You should press
the double hyperspeed zone dual circuit ON/OFF button (13).
The double hyperspeed zone dual circuit indicator neon (14) will
light.
Turning off a dual circuit's outer section
o Both zones of the dual circuit most be switched on.
o For the oval hyperspeed zone, press the oval hyperspeed zone
dual circuit ON/OFF button (8).
o The dual circuit indicator neon (9) will go out and the outer
section will switch off.
o For the double hyperspeed zone, press the double hyperspeed
zone dual circuit ON/OFF button (13).
o The dual circuit indicator neon (14) will go out and the outer
section will switch off.
Turning off a zone gradually
o Press the minus button (5) until the number in
the cooking zone indicator reaches "0". After 3
seconds, the zone will switch off automatically.
13