Baumatic BDW45.1 User Manual page 32

Utensils are not
secure in the baskets
or something small
has dropped into the
basket
Motor hums
Suds in the Improper detergent
tub use
Spilled rinse aid
Stained tub Detergent with
interior colourant was used
Dishes are not Rinse aid dispenser is
fully dried empty
Dishes and Improper program
pans are not
clean
Improper loading
Spots and Extremely hard water
filming on Low inlet
glasses and temperature
pans Improper loading
Improper detergent
Incorrect salt/rinse
aid levels
Steam A normal
phenomenon
Black or grey Aluminium utensils
marks on have rubbed against
dishes dishes
Water This is normal
standing in
the bottom of
the tub
32
Ensure that everything is loaded as
per Baumatic's loading instructions.
If the dishwasher is not going to be
used for a period of time, then you
should make sure that the appliance
is set on a wash program once a
week. Otherwise the seal around the
motor may dry out and cause noise.
Ensure if you are using 3 in 1
detergent tablets, in conjunction with
rinse aid and salt that the levels are
set correctly.
Always wipe up any excess rinse aid
or rinse aid spillages immediately.
Use a detergent without colourant.
Make sure that the rinse aid
dispenser is filled with rinse aid.
Select a more intense wash program.
Make sure that the spray arms and
the detergent dispenser are not
being impeded by large dishes.
Refer to the relevant sections of this
booklet, to ensure that the
detergent, salt and rinse aid levels
are set correctly. Ensure that the
appliance is loaded correctly.
You may get a small amount of
steam coming through the vent by
the door latch, during drying and
water draining.
Use a mild abrasive cleaner to
eliminate the marks. Make sure that
the appliance is loaded correctly in
future.
A small amount of clean water in the
base of the appliance is not
something to be concerned about.