BMW Mini series Owner's Handbook Manual page 56

CONTROLS
Adjusting rain sensor sensitivity
1. Switch on the ignition, see page 46.
2. Press the button in the turn indicator lever
repeatedly until "SET/INFO" appears.
3. Keep the button pressed until the display
changes.
4. Press the button repeatedly until the symbol
and "SET" appear.
5. Keep the button pressed until the display
changes.
6. Press the button to select the desired sensi-
tivity.
7. Wait or keep the button pressed until the
display changes.
The settings are stored.
54
Driving
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG
Deactivating intermittent operation or
rain sensor
Press the button again, arrow 3.
Flick wipe
Press the lever downwards once, arrow 2.
Cleaning windscreen and headlights*
Pull the lever, arrow 4.
Fluid from the washer fluid reservoir is sprayed
on to the windscreen and the wipers are oper-
ated briefly.
When the vehicle's lights are switched on, the
headlights are cleaned simultaneously at practi-
cal intervals.
In cars fitted with an alarm system, the head-
lights cannot be cleaned when the engine com-
partment lid is open.
Do not run the washer systems if the res-
ervoir for washer fluid is empty, or the
washer pump will be damaged.
Only use the washer systems if the engine com-
partment lid is completely locked. Otherwise the
headlight cleaning system
Only operate the washer systems and cleaning
equipment if you are certain that the fluid will
not freeze to the windscreen and interfere with
the view ahead. Screenwash should therefore
be added to the fluid.<
Windscreen washer jets
The windscreen washer jets are heated auto-
*
matically while the engine is running or the
ignition switched on.
*
could be damaged.