BMW Mini series Owner's Handbook Manual page 54

CONTROLS
1. Unclip the gaiter of the selector lever.
2. Pull the gaiter up over the selector lever until
the gaiter is inside out. If necessary, unplug
the cable connector.
3. Insert the puller 1 into the loop on the pas-
senger's side.
4. Pull the strap upwards.
5. To move the selector lever into the desired
position, press the button on the front of the
selector lever knob.
Before manually unlocking the selector
lever interlock, strongly apply the hand-
brake to prevent the vehicle rolling
Flashing turn indicators/
headlight flasher
1 Flashing turn indicators
2 Headlight flasher
Indicating a turn
Press the lever beyond the pressure point.
To cancel it manually, press the lever as far as
the pressure point.
52
Driving
away.<
Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG Online Edition for Part no. 01 40 2 607 512 - © 03/11 BMW AG
Unusually rapid flashing of the indicator
light indicates that a flashing turn indica-
tor bulb has failed.<
Indicating a turn briefly
Press and hold the lever as far as the pressure
point for as long as you wish to indicate a turn.
Triple turn signal
Press the lever as far as the pressure point.
It can be programmed whether the turn indica-
tors flash once or three times.
1. Switch on the ignition, see page 46.
2. Press the button in the turn indicator lever
repeatedly until "SET/INFO" appears.
3. Keep the button pressed until the display
changes.
4. Press the button repeatedly until the symbol
and "SET" appear.
5. Keep the button pressed until the display
changes.