Turning The Sat Nav Unit On/Off; Turning The Sat Nav Unit Off (Sleep Mode); System Reset - Binatone F350 User Manual

Turning the Sat Nav Unit On/Off

Press and hold the On/Off button on the top of the unit for around 3 seconds, the unit
will power up and display the Menu screen.
Press and hold the On/Off button for
around 3 seconds during operation,
the unit will show the following display,
Turning the Sat Nav Unit Off or
Sleep Mode
Press the sleep icon
the unit into sleep mode. Press and
hold the On/Off button again, to bring
the unit out of sleep mode. When
brought out of sleep mode the unit will
show the same screen as when the
unit entered sleep mode.
Press the Off icon
There is a 10 second timer which starts to count down, if there is no selection made
within 10 seconds, the unit will turn off automatically.
Note: If the unit is not to be used for a long period of time it is advised that you switch
the unit Off.

System Reset

Under extreme circumstances it may be necessary to reboot the system. Reset the
system if the following situation occurs:
• Long delay experienced with screen refresh rate or operation, resulting in an
inoperable unit.
• The system will not turn Off with the power button.
• No response with selection made on the screen.
The reset button can be found at the rear of the unit. Insert the tip of the stylus pen
or a small blunt implement into the reset switch hole in order to press. The system
will be immediately reset.
to put
to turn the unit Off.
8
QUICK START GUIDE