Language; Safety Alert; Trace Record - Binatone F350 User Manual

NAVIGATION

8.1 Language

Tap to open the language selection screen. You can
choose from 10 different languages. When a
language is selected not only will it affect the text on
the screen, but will also change the language of the
spoken voice directions.
Tap or to scroll back and forth
between each page.
Select the required language so that it is highlighted
orange and tap to confirm. The unit will return
to the settings screen.

8.2 Safety Alert

Tap to open the safety alert options screen. From
this screen you can set two separate safety alerts.
Speed camera on – This lets you activate or
deactivate the speed camera warning, when
activated the unit will warn you of an approaching
speed camera visually and show you the distance to
the camera.
When the option is shown with an orange indicator it
is activated.
Speed alert when exceeding the road speed limit – This lets you activate or deactivate the
road speed limit warning. As well as speed camera locations, the unit contains information
about the speed limit of many roads. When activated the unit will show you the speed limit
for the road you are on with a fixed speed limit icon, if you exceed the speed limit
(including any tolerance you have set) for the road you are on the speed limit icon will flash
and the unit will beep.
When the option is shown with an orange indicator it is activated.
When active you can then change the speeding tolerance using the and keys to
select the tolerance you would like from 0%, 5%, 10%, 15% and 20%. The unit will then
only warn you when you exceed the speed limit by more than this percentage.
Set the required options and tap to confirm the unit will then return to the settings
screen.

8.3 Trace Record

The unit is capable of logging all positioning
information received from the GPS satellites
during navigation. It then uses this
information to draw a track of the route on
the map. This enables you to review the
route at a later time.
If you have previously recorded any trace
records these will be shown in the list. If
there are no trace records you will have to record one first.
29