Adobe 65029121 - Flash Media Streaming Server Configuration And Administration Manual page 210

206
FLASH MEDIA SERVER 4.5 CONFIGURATION AND ADMINISTRATION
XML configuration files reference
The elements nested within the container configure the large memory pool, which caches large chunks
LargeMemPool
of memory within the server to increase the performance of large allocations.
Contained elements
, , , , , , ,
MaxCacheUnits MaxCacheSize MaxUnitSize FreeRatio GlobalRatio MaxAge UpdateInterval
FreeMemRatio
LicenseInfo
The license number. By default, this value is a parameter in the fms.ini file:
<LicenseInfo>${SERVER.LICENSEINFO}</LicenseInfo>
Note: Serial numbers that are added manually (that is, added by editing those files directly) to either fms.ini or the
tag of Server.xml file cannot be removed using the Administration Console. Only serial numbers that are
LicenseInfo
added using the Administration Console can be deleted using the Administration Console.
Example
<LicenseInfo>${SERVER.LICENSEINFO}</LicenseInfo>
LicenseInfoEx
Contains license keys added using the Administration Console.
Localhost
Specifies the IP loopback address.
The server must reference itself locally. The IP loopback address is usually the default localhost address. With more
than one network interface, localhost can map to an erroneous interface. The server uses the default loopback address
as the local loopback.
LockoutLimit
The maximum number of login failures before a user is prevented from logging into the admin server. If this value is
reached, the admin server must be restarted before that user can log in again.
The default value is 300.
Example
<LockoutLimit>300</LockoutLimit>
See also
, ,
LogInLimits MaxFailures RecoveryTime
LogInLimits
Container element.
Configures the number of failed admin login attempts that are allowed, and the amount of recovery time required
before the admin can attempt to log in again.
Last updated 11/28/2012