3Com 3C13701 Installation Manual page 56

56 C 6: R
HAPTER OUTER
M
AINTENANCE
c Enter <Y>. The system starts restoring and, if successful, displays:
Writing to Boot ROM.Please wait...######
Restoring Boot ROM program successed!
d When Boot ROM Download Menu appears again, select <5> to exit and reboot the
router.
Upgrading the Application Image Through Ethernet
Upgrading the application image with NET is to download using an Ethernet interface. In
this approach, the router is TFTP or FTP Client and needs connecting to TFTP or FTP Server
using a fixed Ethernet interface.
CAUTION: No TFTP/FTP Server is available with the 3Com 5000 Routers. You must install
one yourself.
1 Start TFTP or FTP Server on the PC connected to the Ethernet interface on the router and
set the path for getting the source file. Given FTP Server, you need to set user name and
password in addition.
2 In Boot Menu, select <2> to enter Net Port Download Menu as follows:
Net Port Download Menu:
1: Change Net Parameter
2: Download From Net
3: Exit to Main Menu
Enter your choice(1-3):1
3 In Net Port Download Menu, select <1> for example to change the download
parameters as follows:
Change Boot Parameter:
'.' = clear field;
boot device
processor number
host name
file name
inet on ethernet (e) : 169.254.10.10
inet on backplane (b):
host inet (h)
gateway inet (g)
user (u)
ftp password (pw) (blank = use rsh):
flags (f)
target name (tn)
startup script (s)
other (o)
When upgrading with TFTP, set these parameters:
■
file name: Name of the file to be downloaded
inet on ethernet (e): IP address of the Ethernet interface for downloading
host inet (h): IP address of TFTP Server
flags (f): 0x80
When upgrading with FTP, set these parameters:
■
file name: Name of the file to be downloaded
inet on ethernet (e) : IP address of the Ethernet interface for downloading
'-' = go to previous field;
: fei0
: 0
: 8040
: M8240ram.arj
: 169.254.10.11
:
: 8040
: 0x0
:
:
:
^D = quit