Wired Lan - BenQ MW821ST User Manual

Function
Standby
Settings
Network
Settings
Reset All
Settings
44 Operation
Network
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Microphone
Selecting On enables the function. The projector can output the
microphone signal when it is in standby mode and all the necessary
equipment is correctly connected. See
projector" on page 16
Monitor Out
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See
to make the connection.
Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
for how to make the connection.
Enabling this function slightly increases the standby power consumption.

Wired LAN

Projection Login Code
See BenQ Network Projector Operation Guide
AMX Device Discovery
When AMX Device Discovery is On, the projector can be detected
by AMX controller.
MAC Address
Displays the mac address for this projector.
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size, User 1,
User 2, Projector Installation, Color Space Conversion, High
Altitude Mode, Security Settings, Baud Rate and Network Settings.
Description
"Playing sound through the
for details.
"Connection" on page 15 for how
/
"Connection" on page 15
for details.
to