Kyocera ECOSYS FS-1135MFP Operation Manual page 76

Forward Settings
FAX > Common > Forward > General
Specify the forward settings.
The settings available on the Forward page are shown below.
On
Off
Activating Time Setting
Activating Time
File Name
Additional Information
Add Sender
Information
Print
Forward
After completing the settings, click Submit to save the settings.
Print Settings
FAX > Common > Forward > Print
Use this page to specify the print settings.
The settings available on the Print page are shown below.
Print
After completing the settings, click Submit to save the settings.
Item
All received faxes are forwarded.
Faxes are not forwarded.
Specifies whether a time is specified.
Registers times when the specified requirements are
enabled or disabled. You can register any time between
00:00 and 23:59.
Sets the name of the file created when a fax is forwarded.
Appends information such as the date/time, job number
and destination address to the file name.
Sets the position appended in the additional information.
The additional information consists of the local FAX
number for a FAX transmission and the e-mail address of
this machine in the case of an i-FAX transmission.
To print the fax, click Print. The Print page is displayed.
(Refer to Print Settings on page 4-22.)
To select the forwarding destination, click Forward. The
Forwarding page is displayed. (Refer to Forwarding
Settings on page 4-23.)
Item
Specifies whether faxes forwarded to this machine are
printed.
Description
Description
4-22
FAX Operation (Advanced)