Customizing The Display Icon; Configuring The Device Settings - Lexmark Apps Administrator's Manual

Configuring Downtime Reporting
Network Share Settings
If the forms and reports are stored on a shared folder on the network, then configure the following settings. The
application copies the files from the network share and saves them on the printer hard disk.
•
Network Share Address—Type the IP address or host name of the network share where the forms and reports
are located.
•
Domain—Type the domain where the network share resides.
•
User—Type the user name to use when connecting to the network share.
•
Password—Type the password to use when connecting to the network share.
4
Save or discard your changes.

Customizing the display icon

1
Access the application configuration settings from the Embedded Web Server or MarkVision Professional.
2
From the Configure page, change the home screen settings if necessary:
• Icon Text—Type up to 20 characters that will appear above the profile button on the printer home screen. This
field is required.
•
Welcome Screen Up Icon—Browse to a new image file that represents the profile on the printer home screen.
This field is optional.
•
Welcome Screen Down Icon—Browse to a new image file that appears while the profile icon is being pressed.
This field is optional.
3
Save or discard your changes.

Configuring the device settings

1
Access the application configuration settings from the Embedded Web Server or MarkVision Professional.
2
Configure the device settings.
• Device Access Control—Select a function access control to secure the application.
Note: This function is available only on select printer models.
•
Display Report Date and Time—Select the check box to show the retrieval date and time on the retrieved form
or report.
•
Timestamp Format—Select a format for the time stamp that appears on the retrieved form or report.
•
Enable Direct Print Folder Creation—Select the check box to create nested folders inside the \Direct Print folder
for print jobs sent through the Direct Print function.
Note: The Direct Print function is enabled if the printer is configured to listen on Port 9444. This function
automatically saves all print jobs sent to the printer in the \Direct Print folder in the printer hard disk. The
files inside this folder can only be printed using the application.
5