Electric Connections - Baumatic BDW9 User And Installation Instructions Manual

5.3 CONNECTION OF DRAINAGE WATER
The curved end of drainage hose T, should be hooked into the drainage stand pipe or alternatively
over the edge of your sink.
During installation, the following precautions should be taken:
- the drainage hose must not be bent to or crushed;
- the hose end, relative to the top surface of the dishwasher (fig. 4), must be placed at a height
between 32 and 80 cm;
- the end of the hose must never be immersed in water;
- the drainage hose must not be extended to more than a maximum length of 1 metre. The extension
must have the same internal diameter. Furthermore, the maximum height at which the hose end
can be placed (in the case of an extended tube) must be reduced from 80 to 50 cm.
- The drainage stand pipe must have an internal dia. of no less than 4 cm.

5.4 ELECTRIC CONNECTIONS

THIS APPLIANCE MUST BE EARTHED.
Electrical connection must be made via a correctly installed socket outlet. in accordance
to the current regulations in force at the time of installation.
If in any doubt, we recommend that you seek advise from a qualified electrician.
See data tag for appliance electrical requirements.
T
T
4
1 2 3 4 5 6 7 8 9 0 1
5
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
GB
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1
1 2 3 4 5 6 7 8 9 0 1