Cleaning And Maintenance; Technical Support - Baumatic BF23SS Instruction Manual

Induction hobs
Hide thumbs Also See for BF23SS:
Table of Contents

Advertisement

If you touch the "+" and "-" keys (10-11) of the timer simultaneously,it goes off immediately.

CLEANING AND MAINTENANCE

A few cooking tips
Use only saucepans and frying pans with a sturdy, preferably thick bottom. This is particularly important
when preparing food requiring high cooking temperatures, such as fried foods. If the bottom of the pan is not
perfectly flat, the food takes longer to cook and uses up more energy. The best heat transfer is obtained
when the saucepan and burner are the same size.
You can also use Pyrex and porcelain pans on the burners, providing the bottom of the pan is smooth. Refer
to the instructions of the pan manufacturer on this point.
Any spillages from the pans should be wiped away immediately.
Important notes
Warning: the burner surface becomes red hot when in use, so it is always advisable to keep children well
away from the cook top.
Avoid dropping any hard object on the cook top surface. In some conditions, the material is sensitive to
mechanical loading. The shock of a sharp or pointed object can damage the cooking surface. In the event of
any breakage, cracking or other damage being accidentally caused to the ceramic top, it is essential to stop
using the cook top immediately and contact customer care.
Ceramic glass cook tops must never be used as a work surface. Do not us aluminum pan. Do not prepare
food wrapped in aluminium foil or packaged in plastic. Never use the burner without a saucepan on it. Never
place flammable, explosive or deformable objects in the vicinity of the cook top.
Fats and oils can catch fire if they are overheated: that is why foods requiring the use of fat or oil, e.g. French
fries, must always be supervised while they are cooking.
Moreover, it is essential to make sure that the power cords and plugs of any other domestic appliances
attached to sockets near the cook top can never come into contact with the hot cook top surfaces. No part of
the power supply cable must reach an ambient temperature which is over 50°c.
If damaged, the cable must be replaced with one supplied by the technical assistance service. If the glass
surface breaks, unplug the device from the mains supply in order to avoid getting an electric shock.
The cook top must never be cleaned with steam or other such cleaning devices.
It is essential to clean the cook top - once it has cooled down - every time it has been used. Even the
smallest food scraps would burn the next time it is used. Use only the recommended detergents. Wire wool,
abrasive pads and powders will cause scratching. Oven-cleaning products are unsuitable because they are
corrosive.
Mild soiling can be removed with the aid of a damp cloth or with hot soda. Any traces of detergent must be
removed with cold water and the surfaces must then be accurately dried. Any signs of water that cannot be
removed with boiling water can be eliminated with vinegar and lemon juice, or with a scale-remover fluid. If
any of these detergents comes into contact with the cook top frame, it must be cleaned off immediately with
a wet cloth, to avoid damaging the seal.
Any tenacious dirt can easily be removed with the aid of a glass scraper. The scraper handle must not be
made of plastic because it could become stuck to the hot surfaces. Pay attention while using to scraper: it
can cause injury.
Sugar and foods containing caramelized sugar must be removed immediately from the hot burner.

TECHNICAL SUPPORT

Before calling in the technician:
-
if the cook top does not work, we recommend you first make sure that the plug is fitted properly in the
power socket.
If you cannot find any reason for the malfunction:
-
turn off the appliance and do not manhandle it. Call in the technical support service.
The appliance comes with a guarantee certificate that entitles you to use the technical support service.
The guarantee must be duly completed, kept in a safe place, and exhibited to the authorized technician in
case of need, together with the fiscally valid document issued by the retailer at the time of purchase (delivery
bill, invoice, cash register receipt, etc.) indicating the name of the retailer, the date of delivery, details for
identifying the product and the purchase price.
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bf24ssBiz2ss

Table of Contents