Your Dishwasher - Baumatic BDW2SS Instruction Manual

BAUMATIC BDW2W / BDW2SS
h) THEN, APPLY THE CONDENSATION STRIP.
The Condensation Strip must be fitted to the
underside of the worktop above your dishwasher
to protect it against any moisture. Its purpose is
to deflect steam rising from your appliance to
protect your worktop's underside.
• The strip
dishwasher.
• Ensure the surface is clean prior to
sticking to underside of the worktop.
• Separate the backing paper from the
strip.
• Stick to the underside of the worktop.
Note: Failure to attach strip could
result in damage to the underside of
your work surface!
i) NOW YOU ARE READY TO PUSH THE DISHWASHER
INTO POSITION
NOTE
–
MAKE SURE YOU
DISHWASHER ON ITS SLIDE RAILS
(See figure on right).
THEN MOVE IT INTO THE CABINET
RECESS (AS PICTURED ON RIGHT).
ENSURING THAT IT IS BACKED UP
AGAINST THE WALL. ATTACH THE
FURNITURE DOOR (STEP
PICTURED ON RIGHT) IF YOU HAVE
NOT ALREADY DONE SO.
YOU ARE NOW READY TO SECURE
YOUR APPLIANCE TO THE CABINET
AREA (STEP 5 AS PICTURED ON
RIGHT).
Note: The 'Aesthetic Panel' is
*
the furniture door which you may
have already installed (see pp.
25-26).
j) NOW GET THE DISHWASHER LEVEL.
NOTE:
DISHWASHER MUST BE
LEVEL
DISH RACK OPERATION
is located inside
(SEE FIGURE BELOW):
HAVE THE
1 AS
YOUR
FOR PROPER
dishwasher user manual
your
AND
PERFORMANCE.
WARNING!
30
30
WASH