Cleaning The Burrs; Remove The Ring Burr; Cleaning The Ring Burr - Baratza Encore Operation Manual

Cleaning the Burrs

If the grinder is used daily, the burrs should be
cleaned every few weeks. Cleaning enables the
burrs to achieve the most consistent grind pos-
sible. Cleaning also removes coffee oils, which
can degrade the flavor of the ground coffee. Do
not wash the burr.

Remove the Ring Burr

Pull the silicone seal off the top of the ring Burr.
Remove the ring burr by lifting it straight up out
of the grinder by the lifting tabs. If the burr does
not lift out, ensure that the grind adjustment tab
is turned fully counterclockwise.

Cleaning the Ring Burr

Use the bristle brush (included with your grinder)
to remove any loose coffee residue on the ring
burr and the center cone burr mounted within
the motor housing. Wash the silicone seal in
warm soapy water and dry.
9