Baratza Maestro How-To

On/off switch replacement

Hide thumbs Also See for Maestro:

Download this manual

ver. 1.1

How to: On/Off Switch Replacement

Maestro, Encore.

Time: 10 min

Difficulty: Easy

Tools/supplies: Flat head screwdriver. Phillip's screwdriver. T10 screwdriver. Narrow pick tool or other

poker

Parts: On/Off Switch (SKU: 6037)

Additional Resources: Case Removal (PDF/video)

*** Unplug the grinder from power supply ***

Remove the case using our Case Removal Guide.

Flat head screwdriver

Pick

Switch (6037)

Nut

T10 driver

Pliers

www.baratza.com

support@baratza.com

rev. 4/9/2019

Page 1 1.1 How to: On/Off Switch Replacement Maestro, Encore. Time: 10 min Difficulty: Easy Tools/supplies: Flat head screwdriver. Phillip’s screwdriver. T10 screwdriver. Narrow pick tool or other poker Parts: On/Off Switch (SKU: 6037) Additional Resources: Case Removal (PDF/video) *** Unplug the grinder from power supply *** Remove the case using our Case Removal Guide.
Page 2 (it should spin clockwise). www.baratza.com support@baratza.com rev. 4/9/2019...
Page 3 Locate the correct port on the new switch and push the wire in to insert. www.baratza.com support@baratza.com rev. 4/9/2019...
Page 4 * The board uses Molex connectors which are keyed. Be aware of the correct orientation * Ensure discharge chute is aligned with chassis Install the gearbox/motor assembly, taking care to keep the chute gasket in place. www.baratza.com support@baratza.com rev. 4/9/2019...
Page 5 Screws Secure the safety interlock switch onto it’s posts. Reinstall the case and knob to return the unit to operation. If you have questions, or encounter any issues with this guide, please reach out to support@baratza.com www.baratza.com support@baratza.com rev. 4/9/2019...
Page 6 Pg. 6 Wiring Diagram Safety Interlock Switch Pulse Button www.baratza.com support@baratza.com rev. 4/9/2019...

Encore