Macintosh - HP wp110 - 802.11b Wireless Print Server Setup Manual

3. Enter 192.0.0.192 as the URL in a
browser to open the print server's
Embedded Web Server.
Note Disable the web proxy if one is
being used on the computer.
4. In the Embedded Web Server, select
the Wireless Settings option from the
Configuration menu. Then:
a. Set the print server to the desired
mode (ad hoc or infrastructure).
b. Set the print server SSID to match
the SSID of the WLAN.
c. If WEP security is in use, enable
the WEP Request and enter the
appropriate WEP key as specified
by your network administrator.
5. Apply the changes and reset the print
server by following either the dialog
screens in the Embedded Web Server
or selecting Reset from the menu.
6. Reconfigure the computer to match the
mode of the print server, if necessary.
7. For each computer using the print
server, insert the print server CD-ROM
and select Install from the CD-ROM
menu. Follow the on-screen
instructions.

Macintosh

1. Ensure that the computer is set for
computer to computer communications.
Then open the AirPort menu and
select the hp computer-to-computer
network.
2. Ensure that AppleTalk is set to use
AirPort.
3. Insert the print server CD-ROM. From
the menu, open the appropriate hp
wp110 utility for the operating system.
4. Use the utility to:
– set the print server to the desired
mode (computer to computer or
AirPort Network).
– ensure that the print server SSID
matches the SSID of the WLAN.
– enable the WEP Request and enter
the appropriate Network Equivalent
Password to activate the WEP
feature, if appropriate.
– establish TCP/IP settings (OS X
only).
5. Reset the print server.
6. Reconfigure the computer to match the
mode of the print server, if necessary.
7. Run the Chooser to select the printer.
7