Dashboard: Drive Information; Formatting Your Network Space 2 - LaCie Network Space 2 User Manual

LaCie Network Space 2
User Manual

4.9. Dashboard: Drive Information

This page shows you information about disk usage and will allow
you to reformat your drive.
4.9.1.

Formatting Your Network Space 2

When you click the top Format
disk (including on USBShare) will be erased and the disk will be
formatted. Data on any USB hard drive connected to the front port
will not be affected. When you click the bottom Format button
63, b), only the USBShare will be formatted.
To reformat:
1. Click the FORMAT button.
2. In the blue window that opens, confirm by flicking the
button.
CAUTION: Formatting will erase all the data on your drive (but
will not remove users or settings). Make sure to back up all your
data onto another volume before proceeding. If you are formatting
USBShare and wish to back it up first onto another share, LaCie rec-
ommends you use the File Browser (see
File Browser (Dashboard)) instead of using
Finder for Mac users or an Explorer window for Windows users).
LaCie cannot be held for responsible for the loss of data occurring
during formatting.
• DESIGN BY NEIL POULTON
button (Fig. 63, a), ALL data on the
FORMAT
3.3. Accessing Shares Using
SMB/AFP (i.e. using the
Administering Your LaCie Network Space 2
(Fig.
Fig. 63
Fig. 64
page 42