Dashboard: Drive Information; Formatting Your D2 Network 2; Fig. 62 - LaCie d2 Network 2 User Manual

Design by neil poulton
Hide thumbs Also See for d2 Network 2:
Table of Contents

Advertisement

LaCie d2 Network 2
User Manual

4.11. Dashboard: Drive Information

This page shows you information about disk usage and will allow
you to reformat your drive.

4.11.1. Formatting Your d2 Network 2

When you click the top Format button (Fig.
disk (including on USBShare) will be erased and the disk will be
formatted. Data on any USB or eSATA hard drive connected to the
front port will not be affected. When you click the bottom Format
button (Fig.
62, b), only the USBShare will be formatted.
To reformat:
1. Click the FORMAT button.
2. In the blue window that opens, confirm by flicking the FORMAT
button.
CAUTION: Formatting will erase all the data on your drive (but
will not remove users or settings). Make sure to back up all your
data onto another volume before proceeding. If you are formatting
USBShare and wish to back it up first onto another share, LaCie rec-
ommends you use the File Browser (see 3.3. Accessing Shares Using
File
Browser) instead of using SMB/AFP (i.e. using the Finder for Mac
users or an Explorer window for Windows users). LaCie cannot be
held for responsible for the loss of data occurring during formatting.
• DESIGN BY NEIL POULTON
62, a), ALL data on the
Administering Your LaCie d2 Network 2
Fig. 62
Fig. 63
page 47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents