Installation; Getting Started; Remove Existing Installations - D-Link DWA-548 Manual

Wireless n 300 pci express desktop adapter

Table of Contents

Section 2 - Installation

This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in the device

manager before installing your D-Link adapter.

Before installing your new D-Link wireless adapter, please verify the following:

• Remove any previous installations of wireless adapters (see below)

• Disable any built-in wireless adapters (refer to the next page)

• Verify the settings such as the SSID and security settings of the network(s) you want to connect to

If you've installed a different manufacture's adapter or a different model D-Link adapter, make sure the software is uninstalled

before installing the new software. Some utilities may cause a conflict with the new software. If you plan to use multiple

adapters at different times, make sure the utilities are not set to load when your computer boots up. Windows® 7, Vista® and

XP users may use the built-in wireless utility for all adapters.

To remove any old software:

Windows® 7 users: Click Start > Control Panel > Uninstall Programs.

Windows Vista®/XP users: Click Start > Control Panel > Add or Remove Programs.

D-Link DWA-548 User Manual

Installation

Table of Contents