Adapter Installation - D-Link DWA-548 Manual

Wireless n 300 pci express desktop adapter

Hide thumbs Also See for DWA-548:

Table of Contents

Section 2 - Installation

Adapter Installation

Note: Please install the DWA-548 Desktop PCI Express Adapter into your computer before installing the driver software from the D-Link CD.

When the "Add New Hardware" wizard appears, click Cancel.

Step 1

Before installing, write down the serial number and hardware revision (e.g. A1) in case you need to contact technical support.

Please turn off your computer and unplug the power cord from the computer. Remove the case to access your motherboard.

Firmly insert the DWA-548 adapter into an available PCIe slot inside your computer.

Once inserted, close the case and insert the power cable back into the computer. Connect both antennas to the adapter and then

turn on your computer. Windows will automatically detect and install the adapter.

Step 2

Insert the DWA-548 Driver CD into the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go

to Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive letter of your CD-ROM drive) and click OK. When

the autorun screen appears, click Install and follow the on-screen instructions to install the wireless adapter drivers and software.

D-Link DWA-548 User Manual

Table of Contents