AT&T MLC-6 Installation And Troubleshooting Manual page 15

Install mounting sleeves and
screws. Lightly tap a nail into marks
on wall to start holes. Then slip each
screw into a mounting sleeve (with
screw head in wider barrel of sleeve
and screw securely into wall.
Plug modular telephone cord
into a modular wall jack. (Alterna-
tively, you can plug the cord
directly into a system 206 module,
but you must place the base at
least 20 feet from the 206 module.)
If the base is mounted on a flat surface, slide the Quick Reference
under the base. If the base is wall-mounted, place the Quick
Reference near the base.
12
Mount the base. Place the
base over the screws, than slide it
downward slightly to lock it into
place.
Plug power cord/adapter
into a properly grounded 3-prong
wall outlet.