Asus Striker II Formula User Manual page 64

7. CPU, chassis, and optional fan connectors
(4-pin CPU_FAN, 3-pin CHA_FAN1–3, 3-pin PWR_FAN,
3-pin OPT_FAN1–3)
The fan connectors support cooling fans of 350 mA–1000 mA (24 W max.) or
a total of 1 A–3.48 A (41.76 W max.) at +12V. Connect the fan cables to the
fan connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
STRIKER II FORMULA
STRIKER II FORMULA Fan connectors
•
•
2-36
CPU_FAN
PWR_FAN
OPT_FAN2
CHA_FAN1
CHA_FAN3
OPT_FAN1
OPT_FAN3
®
CHA_FAN2
Only the CPU_FAN, CHA_FAN1–3, and OPT_FAN1–3 connectors support
the ASUS Q-Fan 2 feature.
If you install two VGA cards, we recommend that you plug the chassis fan
cable to the motherboard connector labled CHA_FAN1 or OPT_FAN1/3 for
better themal environment.
CPU_FAN CHA_FAN1
Rotation
+12V
GND
CHA_FAN2
PWR_FAN
Rotation
+12V
CHA_FAN3
GND
Rotation
+12V
GND
Chapter 2: Hardware information
OPT_FAN1
OPT_FAN2
OPT_FAN3