Installing The Optional Fans - Asus Striker II Formula User Manual

2.3.4

Installing the optional fans

Install TWO optional fans when you are using a water cooler to obtain better
heat dissipation. Installing the optional fans with an active CPU cooler will
interfere with the airflow and destabilize the system.
Optional fan on one side fins
1. Position the fan above the pipe
and heatsink assembly.
3. Carefully push down the fan until
it snugly fits the heatsink, then
connect the fan cable.
• Plug the optional fan cable in the OPT_FAN2 connector on the
motherboard.
• Make sure the optional fan is installed correctly to prevent damage to the
fan and motherboard components.
ROG Striker II Formula
. Installing the optional fans with an active CPU cooler will
2.
4.
to obtain better
Fit the fan to the grooved edge of
the heatsink.
The photo shows the fan installed
on the motherboard.
2-15