Advertisement
Setting the Hotel Option Data
To Enter: Press the
MUTE
→
1
→
1
→
9
→
ENTER
buttons in order.
To Exit from this menu : AC Power off, and then turn on again. Any changes you
made are saved.
Menu
Item
initial Value
Description
Select the Hospitality mode.
Hospitality
Hospitality
Standalone
• Standalone
Mode
Mode
• Interactive
Available in the Interactive menu only.
• Select the SI Vendor.
SI Vendor
SI Vendor
Samsung
• Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /Guestek /
SeaChange
Set the default values, which will be applied when the TV is turned on.
Power On
• User Defined : Refers to the settings configured for Power On
Last Saved
Channel EN
Channel, Channel Type.
• Last Saved : Refers to the last saved settings.
Power On
When the TV is turned on, it switches automatically to this channel
3
when in Stand Alone Hospitality mode.
Channel
Channel search CABLE and AIR.
Channel
...
• ATV, DTV : ON-AIR
Type
• CATV (Cable Analog TV), CDTV (Cable Digital TV) : CABLE TV
Set the default volume values which will be applied when the TV is
turned on.
Power On
Last Saved
Power On
Volume EN
• User Defined : Uses the settings configured for Power On Volume.
• Last Saved : Uses the last saved settings.
Power On
...
TV will switch on at this Volume Level in Stand Alone Hospitality mode.
Volume
Min Volume
0
Minimum Volume Level user can set in Stand Alone Hospitality mode.
Maximum Volume Level user can set in Stand Alone Hospitality mode.
Max Volume
100
Power On
TV
Select the input source the TV displays when it is turned on.
Source
Determines the TV's state when power returns after a power failure or
Power On
after you have unplugged the TV and then plugged it in again.
Last Option
- LAST OPT: Returns to its last Power state. If it was in Stand-by, it
Option
returns to Stand-by. If it was on, it turns on.
Channel
You can use the Channel menu option in the OSD.
Setup
Channel
Edit Channel Number and Name.
Editor
Channel
• On : Check the DTV Program channel number. (DTV channel editor
is inaccessible)
Dynamic SI
ON
• Off : No check of the DTV Program channel number. (DTV channel
editor is accessible, but additional channel program number update
is not supported)
Picture Menu
Enable or disable the Picture Menu.
OFF
Lock
Menu OSD
• On : Main Menu displays.
Menu
ON
Display
• Off : Main Menu does not display.
Front panel (Local key) operation on/off.
• Unlock : Unlock all panel keys
Panel Button
Operation
Unlock
• Lock : Lock all panel keys
Lock
• OnlyPower : Lock all panel buttons except Power
• Menu/Source : Lock Menu and Source
Sound Bar
♦
Samsung Sound-Bars and Hospitality TVs in 2012
- Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you
connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV
using a single HDMI cable, guests can listen to theTV's sound through the Sound-Bar.
- Models supporting the ARC function are listed below:
• Sound-Bars: HW-E350/E450/E550
♦
Setting the Sound-Bars to Hotel Mode.
1. Set the following Hotel menu options:
- Hotel option > External Device > Sound Bar Out = On.
- Hotel option > Power On > Power On Volume EN = User Defined.
- Hotel option > Power On > Power On Volume > Set greater than 0.
- Hotel option > Power On > Max Volume > Set greater than 0.
2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the
HDMI2 port (supporting ARC) on the hospitality TV.
3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-
Bar automatically detects the TV, and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
• Power On/Off is synchronized with the TV
• HDMI_CEC defaults to On
• Functions through the "HDMI OUT" port only
• Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
• Acquires adjustable Power On and Max Volume settings from the TV's Hotel option
menu. The Sound-Bar's Power On Volume and Max Volume values, however, are ½ of
the Power On Volume and Max Volume settings in the TV's Hotel option menu.
Example: If the TV's Power On Volume=20 and Max Volume=90, then the Sound Bar's
Power On Volume=10 and Max Volume=45.
Licence
[Hotel-QSG-NA]BN68-04353A-01ENG.indd 2
Description
Menu
Item
initial Value
Select the way to update clock data.
Clock
Local Time
Manual
• Manual: Manual clock setting (without updating from TTX data)
To get music output from an mp3/audio player through an AV Input
Source. When on, you can hear sound from the player through the TV
Music Mode
OFF
whether there is a video signal or not. Also mutes the video so the TV
AV
does not display a picture when a guest is playing music. The TV's
backlight, however, remains on.
To get music output from an mp3/audio player through a PC Input
Source. When on, you can hear sound from the player through the TV
Music Mode
OFF
whether there is a video signal or not. Also mutes the video so the TV
PC
does not display a picture when a guest is playing music. The TV's
Music Mode
backlight, however, remains on.
To get music output from an mp3/audio player through a Component
Input Source. When on, you can hear sound from the player through
Music Mode
OFF
the TV whether there is a video signal or not. Also mutes the video so
Comp
the TV does not display a picture when a guest is playing music. The
TV's backlight, however, remains on.
When set to Off, the TV's backlight is turned off entirely when a guest
Music Mode
OFF
Backlight
uses the Music mode. To save energy, set to Off.
Lets you set the priority of the 7610 RJP AV jack. You can choose 1, 2,
or 3, with 1 being the highest and 3 the lowest. The TV automatically
displays the source with the higher priority. For example, lets say AV
is set to 1 and HDMI is set to 2. If a guest has attached a device to
7610 Priority
1
AV
the HDMI jack, and then plugs a device into the AV jack, the TV will
automatically switch to the device plugged into the AV jack (the jack
with the higher priority). Note that a guest can also switch devices
manually by pushing a button on the 7610 RJP.
Lets you set the priority of the 7610 RJP PC jack. You can choose 1, 2,
or 3, with 1 being the highest and 3 the lowest. The TV automatically
7610 Priority
2
PC
displays the source with the higher priority. See above for a more
detailed explanation.
Lets you set the priority of the 7610 RJP HDMI jack. You can choose 1,
External
7610 Priority
2, or 3, with 1 being the highest and 3 the lowest. The TV automatically
Device
3
HDMI
displays the source with the higher priority. See above for a more
detailed explanation.
7610 AV
AV1
Select RJP AV Source. (AV1/AV2)
Option
RJP HDMI
HDMI1/DVI Select RJP HDMI Source. (HDMI1/HDMI2/HDMI3)
Option
To get music output from an mp3/audio player through a HDMI Input
Source. When on, you can hear sound from the player through the TV
HDMI Music
OFF
Mode
whether there is a video signal or not. (This option is only compatible
with the Guest link RJP.)
Sound Bar
OFF
ON/OFF sound bar out.
Out
When a USB device is connected to the TV:
• Default : Popup window appears.
USB Media
Defalut
Mode
• Automatic : Enters the USB contents menu automatically.
• Disable : Neither the pop-up window or nor the menu appears.
External
Displays the External Source information when you change the TV
Source
source to external input. Press the info key and the TV turns on.
External
Source
ON
• On : The External Source information is displayed on the TV screen.
Banner
• Off : The External Source information is not displayed on the TV
screen.
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching
to other building materials, please contact your nearest dealer. If installed on a
ceiling or slanted wall, TV may fall and result in severe personal injury.
➣
Standard dimensions for wall mount kits are shown in the table below.
Samsung wall mount kits contain a detailed installation manual. All parts
➣
necessary for assembly are provided.
➣
Do not use screws that do not comply with the VESA standard screw
specifications.
➣
Do not use screws that are longer than the standard dimension or do not
comply with the VESA standard screw specifications. Screws that are too
long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw
➣
specifications, the length of the screws may differ depending on the wall
mount specifications.
➣
Do not fasten the screws too firmly. This may damage the product or cause
the product to fall, leading to personal injury. Samsung is not liable for these
kinds of accidents.
➣
Samsung is not liable for product damage or personal injury when a non-
VESA or non-specified wall mount is used or the consumer fails to follow
the product installation instructions.
➣
Do not mount the TV at more than a 15 degree tilt.
➣
Always have two people mount the TV on a wall.
VESA screw hole
Standard Screw
Product
TV size in
specs (A * B) in
(Length*
Quantity
Family
inches
millimeters
Pitch in mm)
19 ~ 22
75 X 75
M4
(10~15 * 0.7)
26
100 X 100
LED-TV
4
M6
32 ~ 40
200 X 200
(10~15 * 1.0)
M8
46
400 X 400
(10~15 * 1.25)
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
Description
Menu
Item
initial Value
• On : In stand-by mode, when an external source is connected to
the TV, the TV automatically goes to AC Power On and Auto Ident
external input mode.
Auto Source
OFF
• PC : Auto Ident PC Input only.
External
• Off : Auto Source is Off.
Source
Anynet+
Power On
Select Return Source for Guest-Link RJP (HDMI-CEC).
Return
Src
Source
Determines the Sub AMP operation mode.
• 0: Turns the Sub AMP function off (PWM off).
• 1: Determines the Sub volume according to the main volume control.
Sub AMP
2
Bathroom
mode
That is, the sub volume is determined according to the Power On
Volume, the Min Volume, and the Max
Speaker
• 2: Determines the volume according to the bathroom control panel setting.
Sub AMP
Sub AMP Volume level at power on initial condition.
6
volume
This feature adjusts the brightness of the TV to reduce power
consumption.
• Off: Turns off the energy saving function.
Energy
Eco Solution
OFF
Saving
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Welcome
Display the Welcome Message for 5 seconds when the TV turns On.
OFF
Message
Edit
Welcome
Edit Welcome Message.
Message
Logo/
Hospitality
Turns the Hospitality logo feature on/off. The Logo is shown during the
OFF
Message
Logo
initial turn on for the amount of time set in "Logo Display Time"
Hospitality Logo Download. (File name required: samsung.bmp/avi,
Hospitality
...
Logo DL
Max file size: BMP 960 x 540 / AVI 30MB, File Type: BMP/AVI)
Logo Display
...
Hospitality Logo Display Time (3/5/7 seconds).
Time
Clone TV to
Clone the current TV option values to a USB memory device.
USB
Clone USB
Cloning
Clone the saved TV option values in a USB memory device to the TV.
to TV
If you set Setting Auto Initialize to On, and the TV's power is turned off
Setting Auto
OFF
Initialize
and on, guest side menu items are restored to their cloned values.
Available in the Standalone menu only.
SIRCH (Samsung Interactive Remote Control for Hospitality) is a
SIRCH
professional interactive remote controller for DTV that lets you deliver
1 hour
TV firmware updates, cloning data, and channel mapping changes to
update Time
several hundred hospitality TVs simultaneously.
SIRCH is sold separately.
SIRCH
• On : Whenever TV goes to Stand-By mode, always runs SIRCH Update.
Update
OFF
• Off : Only runs SIRCH Update on selected SIRCH Update Time.
Immediate
Manual
Upgrade SIRCH Clone / Binary by manual.
SIRCH
SIRCH
SIRCH
87
Select SIRCH Update Channel.
Channel
SIRCH
0000
Display the current SIRCH Clone version.
Version
SIRCH
Select SIRCH Group ID.
ALL
Group ID
REACH
Off
REACH Display On/Off.
IPG Room
Default
Select IPG Room Type.
Type
Specifications
Display Resolution
1920 x 1080
Environmental Considerations
Operating Temperature
50°F to 104°F (10°C to 40°C)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-4°F to 113°F (-20°C to 45°C)
Storage Humidity
5% to 95%, non-condensing
Stand Swivel (Left / Right)
-20˚ ~ 20˚
Model Name
HG40NA590
HG46NA590
Screen Size
40" Class
46" Class
(Diagonal)
(40.0" measured diagonally)
(45.9" measured diagonally)
Power Consumption
Normal operation
89W
99W
Standby
Sound
10W x 2
(Output)
Dimensions (WxDxH)
36.5 X 3.6 X 21.6 inches
41.7 X 3.7 X 24.6 inches
Body
(927.6 X 93.0 X 551.0 mm)
(1059.8 X 94.3 X 625.6 mm)
36.5 X 8.9 X 23.8 inches
41.7 X 8.9 X 26.8 inches
With stand
(927.6 X 227.6 X 607.0 mm)
(1059.8 X 227.6 X 681.2 mm)
Weight
19.8 lbs (9.0 kg)
27.5lbs (12.5 kg)
Without Stand
With Stand
26.2 lbs (11.9 kg)
33.9lbs (15.4 kg)
Model Name
HG40NA790
HG46NA790
HG55NA790
Screen Size
40" Class
46" Class
55˝ Class
(Diagonal)
(40.0" measured diagonally)
(45.9" measured diagonally)
(54.6˝ measured diagonally)
Power Consumption
Normal operation
108W
118W
135W
Standby
Sound
(Output)
10W x 2
Dimensions (WxDxH)
Body
36.4 X 1.8 X 21.7 inches
41.8 X 1.8 X 24.7 inches
49.3 X 1.8 X 29 inches
(926.8 X 46.9 X 553.4 mm)
(1062.2 X 46.9 X 629.8 mm)
(1252.8 X 46.9 X 736.6 mm)
With stand
36.4 X 9.0 X 23.9 inches
41.8 X 9.0 X 26.9 inches
49.3 X 9.0 X 31.1 inches
(926.8 X 227.7 X 608.1 mm)
(1062.2 X 227.7 X 684.6 mm)
(1252.8 X 227.7 X 791.2 mm)
Weight
22.7 lbs (10.3 Kg)
28.4 lbs (12.9 kg)
35.7 lbs (16.2 kg)
Without Stand
29.0 lbs (13.2 Kg)
34.8 lbs (15.8 Kg)
42.0 lbs (19.1 Kg)
With Stand
➣
Design and specifications are subject to change without prior notice.
➣
This device is a Class B digital apparatus.
➣
For information about the power supply and power consumption, refer to the label attached
to the product.
Description
Menu
Item
initial Value
Network
...
Set an IP address to establish an Internet connection.
Setup
Network
Hotel ID
Set a Hotel ID.
...
Setting
Smart Hub
...
Enter Smart Hub.
Widget Mode
OFF
Widget Mode On/Off.
Solution
H.Browser Select type of solution (H.Browser/CMS).
Type
Server IP
...
Setting server IP.
Setting
Server URL
Setting server URL.
...
Widget
Setting
External
Source Menu On/Off.
Source
On
Browser
Virtual
Virtual Standby mode On/Off.
Off
Standby
IPTV Mode
Off
IPTV mode On/Off.
CAS
Pro:idiom
Select CAS.
Displays the state of Pro:Idiom operation.
PI AES DATA
0x0000
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on
Self
the screen.
Diagnosis
• Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and follow
the directions on the screen.
PI AES Log
OFF
Displays the state of Pro:Idiom AES operation.
Service
View PI AES
Display/Save Pro:idiom AES log.
...
Log
SW Upgrade
Upgrade the TV software.
Service
Off
Display SVC pattern.
Pattern
ATV Calble
Control AGC Gain for ONLY SVC.
0
AGC Gain
DTV
Control AGC Gain for ONLY SVC.
OpenCalble
0
AGC Gain
TV Reset
Reset the TV. Same as Factory Reset in Factory option.
Dimensions
HG40NA590 / HG46NA590
5
1
3
4
2
6
(unit: inches)
1
2
3
4
5
HG40NA590
36.5
20.3
21.6
23.8
3.6
HG46NA590
41.7
20.3
24.6
26.8
3.7
HG40NA790 / HG46NA790 / HG55NA790
5
1
3
4
2
6
(unit: inches)
1
2
3
4
5
HG40NA790
36.4
21.6
21.7
23.9
1.8
HG46NA790
41.8
24.7
24.7
26.9
1.8
HG55NA790
49.3
24.7
29
31.1
1.8
2012-04-04 오전 10:54:34
6
8.9
8.9
6
9.0
9.0
9.0
Advertisement
