Display (Monitor) - HP P6230F - Pavilion - Desktop PC Getting Started

Power
Symptom
Error message: Invalid
system disk or
Non-System disk or
Disk error.
Computer does not turn
off when the On button
is pressed.
Computer shuts down
automatically.

Display (monitor)

Symptom
Screen is blank, and
monitor power light is
not lit.
Screen is blank.
Images on the screen
are too large or too
small, or the images are
fuzzy.
Possible solution
When drive activity stops, remove the disk and press the
spacebar on the keyboard. The computer should start up.
Press and hold the On button until the computer turns off.
Check Power Settings.
The computer may be in an exceedingly hot environment. Let it
cool down.
Ensure computer air vents are not blocked and internal fan is
running. Note that your computer may not have an internal fan.
See "Cleaning the computer vents" on page 50.
Possible solution (In addition to the information listed here,
also refer to the documentation that came with your monitor.)
Reconnect the power plug to the back of the monitor and to the
wall outlet.
Press the On button on the front of the monitor.
Press the space bar on the keyboard or move the mouse to
make the screen display visible again.
Press the Sleep button (select models only), or the Esc key on the
keyboard, to resume from Sleep mode.
Press the On button to turn on the computer.
Inspect the monitor video connector for bent pins:
If any of the pins are bent, replace the monitor connector
cable.
If no pins are bent, reconnect the monitor connector cable
to the computer.
Adjust the monitor resolution setting in Windows 7:
1 Click the Start button, and then click Control Panel.
2 Under Appearance and Personalization, click Adjust
Screen Resolution.
3 Adjust resolution as necessary, and then click Apply.
Troubleshooting and Maintenance 31