Table of Contents
Advertisement
5. Disconnect the power supply assembly cables from all drives and from the
power connectors 1 and 2 .
Note: You might need to remove the hard disk drive to gain easy access to
the power connector 1 . See "Replacing the hard disk drive" on page
21.
Figure 25. Power connectors on the system board
6. Remove the power supply assembly cables from the cable clips and ties.
7. Slide the power supply assembly away from the chassis and remove it from
the computer.
Figure 26. Removing the power supply assembly
Chapter 2. Installing options and replacing hardware
29
Advertisement
Table of Contents
