Asus VW247H User Manual page 18

3. Image
You can adjust the image Sharpness, Aspect Control, ASCR, Position (VGA
only), and Focus (VGA only) from this main function.
• Sharpness: Adjusts the picture sharpness. The adjusting range is from 0
to 100.
• Aspect Control: Adjusts the aspect ratio to "Full", "4:3", or "Over Scan"
(Only available for HDMI input).
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• Position: Adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100
(Only available for VGA input).
• Focus: Reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100 (Only available for VGA input).
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one horizontal
sweep. If the frequency is not correct, the screen shows vertical stripes and the
image is not proportional.
4. Input Select
Select the input source from VGA, DVI, or HDMI ("DVI" for VW247H/T/N
only,"HDMI" for VW247H only).
3-3
VW247
Splendid
Color
Image
Input Select
System Setup
Move
VW247
Splendid
Color
Image
Input Select
System Setup
Move
Sharpness
Aspect Control
ASCR
Position
Focus
Menu Exit
VGA
DVI
HDMI
Menu Exit
Chapter 3: General Instruction
50
Full
OFF