JVC KD-HDR52 Instruction Manual page 15

Wiring connection
Vehicle dashboard
Factory wiring harness
(vehicle)
Recommended
connection
Blue: To power antenna
Blue/white: To amplifier
Vehicle-specific Wiring Harness
(separately purchased)
EN_KD-AHD57[J]3.indd 15
Signal cord (not supplied)
Front output
Rear/subwoofer output
Rear ground terminal
Antenna terminal
Light blue/yellow
To the steering wheel
remote control adapter STEERING
KD-AHD57 only
WHEEL
REMOTE
Join the same color wires together.
Blue/white: Remote (200 mA max.)
Orange/white: Illumination
Brown: Tel muting
Yellow: Battery 12 V
Red: Ignition 12 V
Black: Ground
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
Green/black
Purple: Rear speaker (right)
Purple/black
For more information:
Metra Electronics: www.metraonline.com
Scosche Industries: www.scosche.com
JVC Amplifier
Fuse (10 A)
Remote wire
(not supplied)
Ignition switch
Car fuse block
Separate red wire
Make this connection if
your vehicle factory wiring
harness does not have "12 V
ignition switch" wire.
15
Part list for installation
A Faceplate
( ×1 )
B Mounting sleeve
( ×1 )
C Trim plate
( ×1 )
D Wiring harness
( ×1 )
E Extraction key
( ×2 )
ENGLISH
9/13/12 4:07:21 PM