Adjusting The Apex 10 Bracket Assembly - Monitor Audio apex 10 Owner's Manual

adjustIng tHe apex 10 BraCket asseMBLy

The clamping mechanism can be adjusted horizontally and vertically. This is achieved by
taking the weight of the cabinet and loosening the clamp screw (Hex Key included). The
cabinet can now be adjusted at both pivot points 1 and 2 (as shown in the illustration
below). When satisfied with the positioning, tighten the screw.
DO NOT try to adjust the angle of the speaker with the clamp screw tightened.
THIS MAY CAUSE DAMAGE AND INVALIDATE YOUR WARRANTY.
Apex 13