Air King VS80 Installation Instructions

Inverted bag systems:
servicing associated with the secondary filtration associated with a paper bag. Your VS80 is designed for cyclonic
separation of the debris and equipped with a self cleaning inverted filter which acts to protect the motor. The de-
bris is collected in the plastic can liner which makes cleaning of the dust bin easy, clean, and convenient.
Important: To reduce
pIc. 1
the risk of unintentional
operation of your power unit
setup of your VS80 power unit
should be performed with
the unit disconnected from
any power source. This can
be confirmed by verifying he
power unit LED is unlit. (See
Picture # 1)
Select the inverted bag entry port ( Picture # 3 ). You will notice there
is a curved surface which is designed to follow the contours of the
machine. Press the deflector end of the entry port through the side
of the machine until the contoured surface seats firmly against the
side of the bin. ( Picture #4 ). It is not necessary to use glue or a fas-
tener as the design of the entry port will seat firmly inside the VS80
machine creating a suitable seal.
pIc. 5
When connecting the piping system to the VS80 power unit utilize the clamp collar ( Picture # 5 ). Important: Do not glue the clamp
collar to the machine. Press the screw clamp end of the clamp collar onto the inverted bag entry port. Be sure to press it on until the
gap in the collar is completely closed off by the by the entry port stem. ( Picture # 6 ) and ( Picture # 7 ). Once in place tighten the clamp
collar until firmly seated to the entry port collar.
Once the entry port collar is in place you are free to
connect, glue, the piping system from your home to
the vacuum. Be sure to apply solvent to a clean cut
end pipe end not to the inside of the clamp collar
to prevent adhesive from entering the throat of the
piping system. (See Pictures # 8, # 9)
permit the use of the vacuum without the need for the added expense and
pIc. 6
Corporate Headquarters for United States division:
820 Lincoln Avenue • West Chester, PA 19380
pIc. 2
pIc. 3
pIc. 7
pIc. 8
Ph. 800.465.7300
Website: www.airkinglimited.com
Your VS80 power unit is de-
signed to permit either a right
hand or left hand connection to
the piping system from your home
to make connection to the system
as easy as possible. Once the
preferred entry point is selected
move the plug to the opposite side
of the machine and push firmly
into place. (See Picture # 2)
pIc. 4
pIc. 9
#F51069