Configuration For Client Router Mode - TP-Link TL-WR843ND User Manual

Channel Width - Select any channel width from the drop-down list. The default setting

is automatic, which can adjust the channel width for your clients automatically.
Channel - This field determines which operating frequency will be used. The default

channel is set to Auto, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
Max Tx Rate - You can limit the maximum transmission rate of the Router through this

field.
Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the Router without encryption. It is
recommended strongly that you choose one of following options to enable security.
WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.

PSK Password - You can enter ASCII or Hexadecimal characters.

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the
length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key and
all related wireless security settings.
No Change - If you chose this option, wireless security configuration will not change!

These settings are only for basic wireless parameters. For advanced settings, please refer to
4.7 Wireless.
4. Click the Next button. You will see the page as shown in Figure 3-12. Please click the
Reboot/Finish button to make your configuration take effect and finish the Quick Setup.
3.2.2

Configuration for Client Router Mode

When you choose Client Router on Working Mode page in Figure 3-6 , take the following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-13.
TL-WR843ND 300Mbps Wireless AP/Client Router User Guide
Figure 3-12 Quick Setup – Finish
- 17 -