1.4 Panel Layout
1.4.1 The Front Panel
The Router's LEDs are located on the front panel (View from left to right).
Name
(Power)
(System)
(WLAN)
(WAN),
(LAN 1-4)
(WPS)
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
TL-WR843ND
Figure 1-1 Front Panel sketch
Status
Off
Power is off.
On
Power is on.
Flashing
The Router is working properly.
On/Off
The Router has a system error.
Off
The Wireless function is disabled.
Flashing
The Wireless function is enabled.
Off
There is no device linked to the corresponding port.
There is a device linked to the corresponding port but
On
there is no activity.
Flashing
There is an active device linked to the corresponding port.
A wireless device is connecting to the network by WPS
Slow Flash
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by WPS function.
A wireless device failed to be added to the network by
Quick Flash
WPS function.
Table 1-1 The LEDs Description
300Mbps Wireless AP/Client Router User Guide
Indication
- 4 -