Toshiba XS35 - RD - DVDr Owner's Manual page 35

Downloaded from www.Manualslib.com
6
7
8
manuals search engine
Cable input
STEP 2: Configuring for Cable
Your DVD Recorder has more than one input jack. To operate properly with your
cable box, the TV Guide On Screen system needs to know which one your cable
box is plugged into. You may have to look at the back of your DVD Recorder
if you are unsure, as an incorrect selection will result in a blue or snowy screen while
watching TV.
ENTER
Please indicate which DVD Recorder input the cable box is
plugged into.
TUNER
Line 1
Press / to select, then press ENTER.
If you select "TUNER", you will go to step 7.
If you select "Line 1", you will go to step 8.
Tuning channel for the cable box
STEP 2: Configuring for Cable
To operate properly with your cable box, the TV Guide On Screen system needs to
know the channel your DVD Recorder is on when using the cable box. The most
commonly used output channel is 03. Please consult your cable box provider if you are
unsure, as an incorrect selection will result in a blue or snowy screen while
watching TV.
ENTER
What is your DVD Recorder tuned to when using the cable box?
Ch 2
Ch 3
Ch 4
Press / to select, then press ENTER.
Read the instructions and observe the
diagram. Confirm that the G-LINK
its wand is properly installed. (
If OK, press ENTER.
ENTER
® cable and
page 25)
(Continued)
35