Before Use; Control Panel And Functions; Starting Your Appliance; Temperature Control - Moffat U29065 User Manual

Before use

Remove all securing tapes. Wash inside the
appliance with lukewarm water and
bicarbonate of soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may
linger. Dry thoroughly.

Control panel and functions

➀ ➀
Pilot light (green)
➁ ➁
Thermostat control knob
➂ ➂
Fast freeze light (yellow)

Starting your appliance

Insert the plug into the wall socket.
Turn the thermostat knob
the position «O». The pilot light
up., indicating that the appliance is powered.
➄ ➄
The warning light
the temperature inside the appliance is too
high.
To stop operation, simply turn the thermostat
knob to position «O».

Temperature control

The temperature inside the freezer is regulated
by a thermostat control knob
temperature positions and one «OFF» (O)
position.
Position 1 = minimum cold
Position 6 = maximum cold
➀ ➀
➁ ➁
➁ ➁
clockwise after
➀ ➀
will light
will blink indicating that
➁ ➁
with 6
➂ ➂ ➃ ➃ ➄ ➄
➃ ➃
Fast freeze switch
➄ ➄
Warning light (red)
Turn the thermostat control knob to the required
position.
An intermediate position is usually the most
suitable, although the temperature will be
affected by:
• Room temperature
• How often the door is opened
• How much food is stored
• Position of the appliance
In determining the correct temperature control
setting all these factors have to be considered
and some experimentation may be necessary.
To obtain a lower temperature, turn the
thermostat control knob to the higher numbers;
to obtain a higher temperature turn the control
knob to the lower numbers.
When altering the temperature setting, allow 24
hours for the temperature to stabilise before
making further changes.
5