Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
Software Required
The management utility for onboard LSI SCSI can be found in the EasyBUILD 7.1
build 100 (or later).
Software
CIM Browser for
Linux
Installation Tips
Since the SuSE Linux Enterprise Server 9.0 SP3 could detected the
1.
integrated SCSI hardware RAID automatically, just boot the system form
SuSE Linux Enterprise Server 9 Service Pack3 bootable CD.
When you see the boot menu on the screen, select Installation to
2.
continue.
Follow the instructions to change the installation and service pack CDs
3.
during the installation. And follow the normal installation procedure to
complete the installation.
CIM Browser Installation
1.
Insert the EasyBUILD 7.1 b100 and open the folder
/app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm on DVD.
2.
Execute install.bin in /app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm of
EasyBUILD 7.1 build 100. It will launch the graphic installation wizard.
3.
Follow the instruction and use the default setting to complete the
installation.
4.
Launch the CIM Browser.
# /usr/local/bin/LSICim/CIMLSIBroser
SUSE Linux Enterprise Server 9 Service Pack 3 Installation (with
Integrated SAS Hardware RAID)
Below information describes how to manually install SUSE Linux Enterprise
Server 9 Service Pack 3 on Altos R910 with integrated SAS hardware RAID.
Drivers Required
For SUSE Linux Enterprise Server 9 Service Pack 3 Installation, the following
device drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Integrated SAS
52
Version
Directory on EasyBUILD
3.06.01
\app\r910\scsi\CIMBrowser\Linux\
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
00.00.03.01
\Disk\r910\raid\Integrated_SAS\sles9sp
Advertisement
Table of Contents
