Table of Contents
Advertisement
Altos R910 Installation Configuration Guide
Drivers Required
For Red Hat Enterprise Linux 4.0 Update 3 EM64T Installation, the following
device drivers are required.
Device
Onboard ATI
Radeon 7000 VGA
Onboard Intel
E8501 Chipset
Onboard LSI 1030
SCSI Controller
Onboard Broadcom
BCM5704 Gigabit
Ethernet
Onboard USB 2.0
Hot-swap
backplane
Software Required
The management utility for onboard LSI SCSI can be found in the EasyBUILD 7.1
build 100 (or later).
Software
CIM Browser for
Linux
Installation Tips
Since Red Hat Enterprise Linux 4.0 EM64T Update 3 can detect the onboard LSI
SCSI automatically, you can just boot the system with Red Hat Enterprise Linux
OS installation CD and follow the instruction to do the installation.
CIM Browser Installation
1.
Insert the EasyBUILD 7.1 b100 and open the folder
/app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm on DVD.
2.
Execute install.bin in /app/r910/scsi/CIMBowser/Linux/InstData/Linux/vm of
EasyBUILD 7.1 build 100 from a terminal. It will launch the graphic
installation wizard.
# ./install.bin
3.
Follow the instruction and use the default setting to complete the
installation.
4.
Launch the CIM Browser.
# /usr/local/bin/LSICim/CIMLSIBroser
42
Version
Directory on EasyBUILD
N/A
Built-in
N/A
Built-in
3.02.62.01rh
Built-in
3.43-rh
Built-in
N/A
Built-in
N/A
Built-in
Version
Directory on EasyBUILD
3.06.01
\app\r910\scsi\CIMBrowser\Linux\
Advertisement
Table of Contents
