Table of Contents
Advertisement
5.3
EISA Configuration Utility
The EISA Configuration Utility (ECU) is a program that allows you to
easily configure your EISA computer. Use this utility when you set up
your EISA computer for the first time or any time you change your
configuration by adding or removing an EISA or ISA board. The
program stores the configuration information in the computer's
nonvolatile memory where it is available whenever you use your
computer.
5.3.1
Functions
The ECU does the following:
Automatically detects and configures the system memory.
Supports EISA and ISA boards, PCI devices, and plug-and-play
ISA boards.
Automatically detects EISA boards, PCI devices, and plug-and-
play ISA boards installed in the computer.
Helps you configure EISA board by providing the appropriate
switch and jumper settings.
Notifies you immediately if a conflict occurs during configuration.
Creates
and
Information (SCI) file as a backup for the computer's nonvolatile
memory.
Supports configuration (CFG) file extensions.
Diagnostics and Utilities
maintains
the
System
Configuration
5-3
Advertisement
Table of Contents
