Table of Contents
Advertisement
6.
Retype the password then press
After setting the password, the system automatically sets the
Setup Password parameter to
7.
Press
to exit the System Security screen and return to the
main menu.
8.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
9.
Select
to save the changes and reboot the system.
Yes
10. While rebooting, turn off the system then open the housing.
11. Set JP11 to
to enable the password function.
1-2
The next time you want to enter the BIOS utility, you must key-in your
Setup password.
Changing or Removing the Setup Password
Should you want to change your setup password, do the following:
1.
Enter the BIOS utility and select System Security.
2.
Highlight the Setup Password parameter.
3.
Press
or
to display the password prompt and key-in a new
password.
or
Press
or
password.
BIOS Utility
.
Present
.
and select
None
to remove the existing
4-33
Advertisement
Table of Contents
